最近のわずかの数年間で、Oracleの1z1-497認定試験は日常生活でますます大きな影響をもたらすようになりました。将来の重要な問題はどうやって一回で効果的にOracleの1z1-497認定試験に合格するかのことになります。この質問を解決したいのなら、JPexamのOracleの1z1-497試験トレーニング資料を利用すればいいです。この資料を手に入れたら、一回で試験に合格することができるようになりますから、あなたはまだ何を持っているのですか。速くJPexamのOracleの1z1-497試験トレーニング資料を買いに行きましょう。
JPexamがIT認証試験対策ツールのサイトで開発した問題集はとてもIT認証試験の受験生に適用します。JPexamが提供した研修ツールが対応性的なので君の貴重な時間とエネルギーを節約できます。
今は時間がそんなに重要な社会でもっとも少ないお時間を使って試験に合格するのは一番よいだと思います。JPexamが短期な訓練を提供し、一回に君の試験に合格させることができます。試験に失敗したら、全額で返金いたします。
Oracleの1z1-485試験に合格することは容易なことではなくて、良い訓練ツールは成功の保証でJPexamは君の試験の問題を準備してしまいました。君の初めての合格を目標にします。
試験番号：1z1-497問題集試験科目：Oracle Database 12c Essentials
最近更新時間：2014-07-23
問題と解答：全150問 1z1-497 練習問題
100％の返金保証。1年間の無料アップデート。
試験番号：1z1-485問題集試験科目：Exadata Database Machine Models X3-2 and X3-8 Implementation Essentials
最近更新時間：2014-07-23
問題と解答：全71問 1z1-485 学習教材
100％の返金保証。1年間の無料アップデート。
試験番号：1z0-485問題集試験科目：Exadata Database Machine Models X3-2 and X3-8 Implementation Essentials
最近更新時間：2014-07-23
問題と解答：全71問 1z0-485 資格認定
100％の返金保証。1年間の無料アップデート。
一つの試験だけでは多くの時間を無駄にする必要がありません。1z0-485認定試験が大変難しいと感じて、多くの時間を取らなければならないとしたら、ツールとしてJPexamの1z0-485問題集を利用したほうがいいです。この問題集はあなたに時間を節約させることができますから。もっと重要なのは、この問題集はあなたが試験に合格することを保証できますから。この問題集よりもっと良いツールは何一つありません。試験の準備をするのにたくさんの時間を無駄にするより、そんな時間を利用してもっと有意義なことをしたほうがいいです。ですから、はやくJPexamのサイトに行ってもっと多くの情報を読みましょう。この素晴らしきチャンスを逃したらきっと後悔しますよ。
従来の試験によってJPexam が今年のOracleの1z1-485認定試験を予測してもっとも真実に近い問題集を研究し続けます。JPexamは100%でOracleの1z1-485認定試験に合格するのを保証いたします。
JPexamが提供したOracleの1z0-485試験問題と解答が真実の試験の練習問題と解答は最高の相似性があり、一年の無料オンラインの更新のサービスがあり、100%のパス率を保証して、もし試験に合格しないと、弊社は全額で返金いたします。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/1z0-485_exam.html
NO.1 Exadata Database Machine offers an Intelligent Platform Management Interface for the
various components in the Exadata product. Which option is true?
A. IPMI can be used to remotely start and stop servers.
B. IPMI can be used to remotely log in to the operating system.
C. IPMI commands can be executed by using SNMP traps.
D. IPMI settings can be secured by backing up the Oracle Linux installation on the storage system.
Answer: A
Oracle 1z0-485独学 1z0-485認定資格 1z0-485 1z0-485一発合格 1z0-485受験記
Explanation:
IPMI - short for Intelligent Platform Management Interface - is an interface standard that allows
remote management of a server from another using standardized interface. The servers in the
Exadata Database Machine follow that. It's not an Exadata command but rather a general Linux one.
To power on a cell or database server, issue this from another server: # ipmitool -H prolcel01-ilom
-U root chassis power on
To stop a server, use the shutdown command. To stop immediately and keep it down, i.e. not reboot,
execute:# shutdown -h -y now
NO.2 Consider this CellCLI command:
CellCLI> CREATE GRIDDISK ALL HARDDISK PREFIX=data, size=423G;
Which two statements describe what happens when you execute this command?
A. It creates one 423 GB grid disk on the first available cell hard disk.
B. It creates one 423 GB grid disk on each available cell hard disk.
C. It creates grid disks on the outermost 423 GB that is available on each hard disk.
D. It creates grid disks on the innermost 423 GB that is available on each hard disk.
E. It creates an Exadata Smart Flash Cache on all flash drives.
Answer: B,C
Oracle 1z0-485認定試験 1z0-485 1z0-485
Explanation:
* Example: CellCLI> create griddisk all harddisk prefix=temp_dg, size=570G This command will
create 12 Griddisks, each of 570G in size from the outer (fastest) sectors of the underlying Harddisks.
It fills up the first 2 Celldisks entirely, because they have just 570G space free - the rest is already
consumed by the OS partition.
NO.3 Identify three best practices for applying asmdeactivationoutcome es on Exadata Database
Servers and Exadata Storage Servers?
A. Backing up database servers and storage cells is not recommended before performing planned
maintenance.
B. Database server updates can be rolled back using the the "yum downgrade" procedure.
C. Bundle patches do not require testing before being installed on a production system.
D. It is recommended that Exadata systems with Data Guard configured use the "Standby First"
patching approach.
E. Patching should never be interrupted due to a connection drop. It is therefore recommended that
you use VNC or the screen utility.
F. Before patching cells in a rolling manner, you must check asmdeactivationoutcome amModestatus
and make sure that cells on all disks are online and that disks can be deactivated.
Answer: D,E,F
Oracle練習 1z0-485日記 1z0-485 1z0-485
NO.4 Which two statements are true about enabling write-back flash cache?
A. When enabling write-back flash cache in a non rolling manner, it is important to ensure that
asmdeactivatonoutcome is set to YES and asmModestatus is set to ONLINE for all grid disks.
B. Before using write-back flash cache, you need to verify the minimum required versions.
C. Before write back-flash cache is enabled, you need to drop the Flash Cache first.
D. The setting flashCacheMode should be set to writeback by updating cellinit.ora and restarting
cellsrv.
E. When enabling write-back flash cache in a rolling manner, dcli should be used to inactivate the
grid disks on all cells first.
Answer: B,C
Oracle番号 1z0-485過去問 1z0-485内容 1z0-485攻略
Explanation:
B: Exadata storage version 11.2.3.2.1 is the minimum version required to use this write back flash
cache option.
C: Steps for Enabling Write back flash cache:
First of all, you don't need the stop CRS or database (This is ROLLING method) ,you can do it cell
by cell.
*drop flashcache
*Be sure asmdeactivationoutcome is YES is before disabling grid disk
NO.5 Which is the best location to point your customer to, for finding the latest Exadata patches?
A. owner's guide
B. Patch database in MyOracle Support
C. MyOracle Support note 888828.1
D. MyOracle Support for database patches, ULN for OS patches, and Sun Support for Server and
InfiniBand patches.
Answer: B
Oracle 1z0-485 1z0-485 1z0-485関節 1z0-485 1z0-485フリーク
Explanation:
Before starting, we would like to share and note here two documents from My Oracle Support, aka
metalink. These notes must be the first place that you need to go to review before patching the
Exadata environment.
* (B) Database Machine and Exadata Storage Server 11g Release 2 (11.2) Supported Versions (Doc ID.
888828.1)
-This is for the second and third generation (V2 and X2) for Oracle Exadata, using Sun hardware.
* Database Machine and Exadata Storage Server 11g Release 1 (11.1) Supported Versions (Doc
ID. 835032.1)
* - This is for the first generation (V1) for Oracle Exadata, using HP hardware.
NO.6 You get a Host Unreachable error when you attempt to connect to a server through a network
terminal command line. What are two other ways in which you can connect?
A. Use the ILOM Web GUI.
B. Use the dcli command at the root prompt on a database node.
C. Attach a terminal device to the back panel of the server with a serial cable.
D. Connect by using SQL *Plus.
E. Log in as root on the database node using the Net1 IP address.
Answer: A,C
Oracle初心者 1z0-485練習 1z0-485対策
Explanation:
In addition to gaining shell access via SSH to manage your Exadata servers, you can also access them
from the Integrated Lights Out Management (ILOM) console or KVM console.
and should typically not require modifications unless you have changed network information inside
your database machine.
Note: A KVM switch (with KVM being an abbreviation for "keyboard, video and mouse") is a
hardware device that allows a user to control multiple computers from one or more[1] keyboard,
video monitor and mouse. Although multiple computers areconnected to the KVM, typically a
smaller number of computers can be controlled at any given time
NO.7 Changes for Linux system performance optimization
Which of the software changes listed are permitted on Exadata Storage Servers?
A. 1, 2, 3, and 4
B. only 3 '
C. none
D. only 2
E. only 1 and 2
F. only 2 and 3
Answer: E
Oracle 1z0-485ガイド 1z0-485関節 1z0-485
Explanation:
1. The Storage Server Patch is responsible for keeping our cell nodes always up-todate, fixing
possible problems, and this patch includes different component patches, like kernel patches,
firmware, operation system, etc... for the Storage Server. Incorrect: 3,4: security scan tools changes
and Linux system performance optimization changes would be on the database server.
4. The mpstat output from OS Watcher shows a database node as being 90% idle on an average.
What would you do to get a full picture of CPU utilization on the entire Exadata RAC cluster?
A. Average the mpstat id1 output from all the nodes.
B. Ask application users if they have noticed a slowdown in screen response.
C. Look for an increase in batch job servicing times.
D. A & B above
Answer: A
Oracle参考書 1z0-485赤本 1z0-485赤本 1z0-485 vue
NO.8 Consider the following software changes that are performed manually on a Linux server:
1.Changes for Linux kernel firewall configuration
2.Changes for custom performance monitoring tools
3.Changes for security scan tools
没有评论:
发表评论