2014年4月21日星期一

楽にOMG UM0-300認定試験の準備を完了したい?

OMGのUM0-300の認定試験に合格すれば、就職機会が多くなります。この試験に合格すれば君の専門知識がとても強いを証明し得ます。OMGのUM0-300の認定試験は君の実力を考察するテストでございます。

現在、IT業界での激しい競争に直面しているあなたは、無力に感じるでしょう。これは避けられないことですから、あなたがしなければならないことは、自分のキャリアを護衛するのです。色々な選択がありますが、JPexamのOMGのUM0-300問題集と解答をお勧めします。それはあなたが成功認定を助ける良いヘルパーですから、あなたはまだ何を待っているのですか。速く最新のJPexamのOMGのUM0-300トレーニング資料を取りに行きましょう。

試験番号:UM0-300問題集
試験科目:Omg-Certified uml professional advanded exam
最近更新時間:2014-04-21
問題と解答:全134問
100%の返金保証。1年間の無料アップデート。

あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。きっとそれを望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。では、IT業種で仕事しているあなたはどうやって自分のレベルを高めるべきですか。実は、UM0-300認定試験を受験して認証資格を取るのは一つの良い方法です。OMGの認定試験のUM0-300資格は非常に大切なものですから、OMGの試験を受ける人もますます多くなっています。

生活で他の人が何かやったくれることをいつも要求しないで、私が他の人に何かやってあげられることをよく考えるべきです。職場でも同じです。ボスに偉大な価値を創造してあげたら、ボスは無論あなたをヘアします。これに反して、あなたがずっと普通な職員だったら、遅かれ早かれ解雇されます。ですから、IT認定試験に受かって、自分の能力を高めるべきです。 JPexamのOMGのUM0-300試験問題集はあなたが成功へのショートカットを与えます。IT 職員はほとんど行動しましたから、あなたはまだ何を待っているのですか。ためらわずにJPexamのOMGのUM0-300試験トレーニング資料を購入しましょう。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/UM0-300_exam.html

NO.1 Which stereotype is used on a dashed arrow joining an instance value to a constructor?
A. <<new>>
B. <<make>>
C. <<create>>
D. <<construct>>
E. <<initialize>>
Answer: C

OMG   UM0-300   UM0-300

NO.2 What does a collaboration occurrence describe?
A. a particular aspect of a collaboration
B. an object that is an instance of a collaboration
C. a collaboration that contains a set of actual instances (as opposed to roles)
D. the instantiation of the pattern specified by the corresponding collaboration
Answer: D

OMG参考書   UM0-300   UM0-300練習問題   UM0-300認定証

NO.3 Which action can continue to be enabled after it executes?
A. ReplyAction
B. ReadExtentAction
C. AcceptEventAction
D. BroadcastSignalAction
E. StartOwnedBehaviorAction
Answer: C

OMG問題集   UM0-300参考書   UM0-300参考書

NO.4 What is the correct interpretation for the multiplicities in the exhibit?
A. each Company has one Job, where each Job has one employee
B. each Job is for one employer and one employee, each Company has any number of employees and
each Person has any number of employers
C. each Person has at most one Job for any number of Company objects and each Company has at most
one Job for any number of Person objects
D. each Job has any number of employers and any number of employees, each Company has any
number of employees, and each Person has any number of employers
Answer: B

OMG認定証   UM0-300   UM0-300認定資格

NO.5 What is wrong with the collaboration occurrence shown in the exhibit?
A. The <<role>> keywords are missing.
B. The <<occurrence>> keyword is missing.
C. Client and Server role names should be underlined.
D. Role bindings should be represented by dashed lines.
E. The collaboration occurrence name should be underlined.
Answer: D

OMG   UM0-300   UM0-300認証試験

NO.6 What does the composite structure notation show in the exhibit?
A. p is a hidden port.
B. p is a behavior port.
C. p is a port providing a system service.
D. p is a port on a part of composite C, which is not shown.
Answer: A

OMG   UM0-300参考書   UM0-300   UM0-300   UM0-300過去問   UM0-300

NO.7 What characteristics of components best enable them to be used to represent diverse and
"large-scale" aspects of information processing environments?
A. black-box semantics
B. ports, parts, and interfaces
C. duality of association ends and attributes
D. ownership of potentially large numbers of model elements
Answer: D

OMG認証試験   UM0-300   UM0-300   UM0-300

NO.8 In the exhibit, how many links are created by default when an instance of A is created?
A. two
B. four
C. eight
D. none
Answer: B

OMG   UM0-300   UM0-300   UM0-300問題集

NO.9 An employee inadvertently removed all of the ownedMembers of the new BoosterMotor component
from his company's development repository. The next day, the manager was unable to find some pieces
of the BoosterMotor component's specification. What pieces could the manager no longer find? (Choose
two)
A. failure mode use cases
B. the component repository
C. test scripts for the rocket sled simulation
D. the launch assembly housing the BoosterMotor
E. the component's isIndirectlyInstantiated attribute
Answer: AC

OMG認証試験   UM0-300   UM0-300認証試験   UM0-300

NO.10 What happens to the exception from a RaiseExceptionAction when used in a model that has no
exception parameters declared?
A. ignored
B. handled by a default handler
C. appended to an exception log
D. sent to the "ExceptionManager" object
E. propagated to an enclosing protected node, if any
Answer: E

OMG認定試験   UM0-300参考書   UM0-300認定資格   UM0-300認証試験

NO.11 A ReplyAction always follows what action?
A. ReadExtentAction
B. AcceptCallAction
C. AcceptEventAction
D. CreateLinkObjectAction
E. StartOwnedBehaviorAction
Answer: B

OMG   UM0-300参考書   UM0-300参考書   UM0-300認定証   UM0-300問題集   UM0-300認定資格

NO.12 By what means can a design document be associated with the component it describes? (Choose
three)
A. import
B. inheritance
C. ownership
D. dependency
E. power types
F. association end subsets
Answer: ACD

OMG認定資格   UM0-300   UM0-300   UM0-300練習問題

NO.13 How is a power type indicated in a diagram?
A. as a classifier labeled <<powerType>>
B. as an association line labeled <<powerType>>
C. as a generalization set labeled <<powerType>>
D. as a generalization set labeled with a colon followed by a classifier name
E. as a generalization set labeled with a colon followed by the label <<powerType>>
Answer: D

OMG   UM0-300   UM0-300問題集   UM0-300

NO.14 An association class possesses the properties of which elements? (Choose two)
A. class
B. interface
C. constraint
D. expression
E. association
Answer: AE

OMG   UM0-300問題集   UM0-300認定資格   UM0-300認定資格

NO.15 Which situations would result in errors when executing a ReclassifyObjectAction on an object?
(Choose two)
A. No new classifiers are supplied.
B. A new classifier is an abstract class.
C. The old and new classifiers are identical.
D. All classifiers are removed from the object.
E. A new classifier already classifies the object.
F. An old classifier does not already classify the object.
Answer: BD

OMG認証試験   UM0-300   UM0-300認定証   UM0-300

NO.16 What is NOT possible when a classifier receives a request via one of its ports?
A. A new port is created on the classifier.
B. A behavior of the classifier is invoked.
C. The request is forwarded to a part of the classifier.
D. The request does not trigger any behavior and is not forwarded.
E. The port routes the request to one of a number of parts depending on the content of the request.
Answer: A

OMG参考書   UM0-300   UM0-300   UM0-300過去問

NO.17 Which action does NOT require classifiers as static inputs?
A. ReadExtentAction
B. CreateObjectAction
C. ReclassifyObjectAction
D. StartOwnedBehaviorAction
E. ReadIsClassifiedObjectAction
Answer: D

OMG   UM0-300過去問   UM0-300

NO.18 What is a power type?
A. classifier containing a very large number of instances
B. classifier whose instances are objects of another classifier
C. classifier whose instances are operations of another classifier
D. classifier whose instances are subclasses of another classifier
Answer: D

OMG問題集   UM0-300認定証   UM0-300   UM0-300

NO.19 What does a port specification on a trigger do?
A. send a request to a port
B. create a new port after a classifier has been instantiated
C. restrict the trigger to events arriving through a specific port
D. delay the creation of the parts of an encapsulated classifier until a specified request is received
Answer: C

OMG   UM0-300参考書   UM0-300問題集   UM0-300   UM0-300

NO.20 When a component is deleted, what happens to objects in a component's namespace?
A. objects are deleted
B. objects continue to exist
C. only those objects that participate in shared aggregations are retained
D. contents of the component's namespace are promoted to its superclass
Answer: A

OMG認証試験   UM0-300過去問   UM0-300過去問   UM0-300認定証   UM0-300認定証   UM0-300練習問題

JPexamは最新のECP-541問題集と高品質の00M-670問題と回答を提供します。JPexamのHH0-240 VCEテストエンジンと648-238試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の642-457 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/UM0-300_exam.html

没有评论:

发表评论