JPexamのHPのHP0-Y12試験トレーニング資料はPDFぼ形式とソフトウェアの形式で提供して、JPexamのHPのHP0-Y12試験問題と解答に含まれています。HP0-Y12認定試験の真実の問題に会うかもしれません。そんな問題はパーフェクトと称するに足って、効果的な方法がありますから、どちらのHPのHP0-Y12試験に成功を取ることができます。JPexamのHPのHP0-Y12問題集は総合的にすべてのシラバスと複雑な問題をカバーしています。JPexamのHPのHP0-Y12テストの問題と解答は本物の試験の挑戦で、あなたのいつもの考え方を変換しなければなりません。
JPexamを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。JPexamはHP HP0-Y12認証試験を助けって通じての最良の選択で、１００％のHP HP0-Y12認証試験合格率のはJPexam最高の保証でございます。君が選んだのはJPexam、成功を選択したのに等しいです。
IT認証試験に合格したい受験生の皆さんはきっと試験の準備をするために大変悩んでいるでしょう。しかし準備しなければならないのですから、落ち着かない心理になりました。しかし、JPexamのHPのHP0-Y12トレーニング資料を利用してから、その落ち着かない心はなくなった人がたくさんいます。JPexamのHPのHP0-Y12トレーニング資料を持っていたら、自信を持つようになります。試験に合格しない心配する必要がないですから、気楽に試験を受けることができます。これは心のヘルプだけではなく、試験に合格することで、明るい明日を持つこともできるようになります。
試験番号：HP0-Y12問題集
試験科目：Building ProCurve Resilient, Adaptive Networks
最近更新時間：2014-04-18
問題と解答：全116問
100％の返金保証。1年間の無料アップデート。
JPexamのHPのHP0-Y12試験トレーニング資料はインターネットでの全てのトレーニング資料のリーダーです。JPexamはあなたが首尾よく試験に合格することを助けるだけでなく、あなたの知識と技能を向上させることもできます。あなたが自分のキャリアでの異なる条件で自身の利点を発揮することを助けられます。
HP0-Y12認定試験に合格することは難しいようですね。試験を申し込みたいあなたは、いまどうやって試験に準備すべきなのかで悩んでいますか。そうだったら、下記のものを読んでください。いまHP0-Y12試験に合格するショートカットを教えてあげますから。あなたを試験に一発合格させる素晴らしいHP0-Y12試験に関連する参考書が登場しますよ。それはJPexamのHP0-Y12問題集です。気楽に試験に合格したければ、はやく試しに来てください。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/HP0-Y12_exam.html
NO.1 What is the effect when the following command is entered at the CLI of a ProCurve Switch 5406zl?
5406zl(vlan-111)#qos priority 2
A. Packets entering the switch through VLAN 111 will be forwarded with normal priority.
B. Packets entering the switch through VLAN 111 will be forwarded with lower than normal priority.
C. Packets entering the switch through VLAN 111 will be forwarded with higher than normal priority.
D. Packets entering the switch through VLAN 111 will retain the priority marker set by another device.
Answer: B
HP HP0-Y12認証試験 HP0-Y12
NO.2 Which condition is necessary to enable a group of networks to be auto-summarized by a ProCurve
Switch 3500yl?
A. The address ranges to be summarized must be within different OSPF areas.
B. The address ranges to be summarized must be within a classful network boundary.
C. The address ranges to be summarized must be directly connected to a neighbor router.
D. The address ranges to be summarized must be accessible through a neighbor router interface.
Answer: B
HP認証試験 HP0-Y12過去問 HP0-Y12 HP0-Y12参考書 HP0-Y12
NO.3 What is the role of an OSPF Area Border Router?
A. to connect multiple non-backbone areas
B. to connect a backbone area to non-backbone areas
C. to connect OSPF domains with domains that use other routing protocols
D. to connect a backbone area to the backbones of other OSPF routing domains
Answer: B
HP HP0-Y12 HP0-Y12
NO.4 When does an LLDP-enabled switch start sending LLDP advertisements?
A. when QoS is enabled
B. when IP multicast is enabled
C. immediately after it has started
D. when it receives an LLDP request from a neighbor
Answer: C
HP認定証 HP0-Y12 HP0-Y12 HP0-Y12参考書
NO.5 How many priority levels are specified by the IEEE 802.1p standard?
A. 4
B. 7
C. 8 D. 16
Answer: C
HP HP0-Y12過去問 HP0-Y12参考書
NO.6 You enter the following command at the CLI of a ProCurve Switch 3500yl:
3500.l(config)#ip route 22.0.0.0/8 172.16.100.100
However, when you enter show ip route to confirm your entry, no route to 22.0.0.0/8 appears in the route
table. Which
statement explains this condition?
A. The interface connected to 172.16.100.100 is down.
B. The switch has learned another route to 22.0.0.0/8 through OSPF.
C. The route table already includes a default route using 172.16.100.100.
D. The switch has not been configured with an IP address of 172.16.100.100.
Answer:A
HP認証試験 HP0-Y12過去問 HP0-Y12認定資格 HP0-Y12認定資格 HP0-Y12過去問 HP0-Y12
NO.7 When does a router use administrative distance to determine which route to include in its route table?
A. when the router learned about multiple routes with equal-cost paths to the same destination
B. when the router learned about multiple routes to the same destination from different sources using the
same routing protocol
C. when the router learned about multiple routes to the same destination from different routing protocols
or static configuration
D. when the router is configured with static routes to the same destination that specify the same cost but
different next hop router interfaces
Answer: C
HP HP0-Y12認定試験 HP0-Y12 HP0-Y12 HP0-Y12認証試験
NO.8 By default, what type of route is redistributed in RIP updates by ProCurve ProVision ASIC switches?
A. static
B. default
C. OSPF
D. connected
Answer: D
HP HP0-Y12参考書 HP0-Y12認証試験
NO.9 What are the advantages of implementing IP routing technologies at the network edge? (Select two.)
A. provide per-user QoS
B. decrease the load on network core
C. eliminate the need for routing protocols
D. create smaller, localized broadcast domains
E. enhance support for default gateway redundancy
Answer: BD
HP HP0-Y12 HP0-Y12 HP0-Y12 HP0-Y12認定試験
NO.10 While analyzing network traffic using a port monitor on a ProCurve Switch 8212zl, you notice that
many packets have an 802.1p value of 1. If the switch has default QoS settings, what does this indicate?
A. The 8212zl has marked the traffic for low-priority forwarding.
B. The 8212zl has marked the traffic for high-priority forwarding.
C. Another device has marked the traffic for low-priority forwarding.
D. Another device has marked the traffic for high-priority forwarding.
Answer: C
HP過去問 HP0-Y12 HP0-Y12参考書 HP0-Y12
NO.11 What is an advantage of locating routing intelligence at the edge of an enterprise network instead of in
the core?
A. The edge-oriented strategy requires fewer VLANs and networks.
B. The edge-oriented strategy supports VRRP and other protocols for default gateway redundancy.
C. The edge-oriented strategy enables ACLs and other traffic filters to be applied before traffic traverses
any part of the network.
D. The edge-oriented strategy simplifies summarization because each router must support VLANs only
for directly connected users.
Answer: C
HP HP0-Y12 HP0-Y12 HP0-Y12 HP0-Y12認定証
NO.12 What is the difference between administrative distance and cost?
A. Administrative distance is applied only to routes learned through OSPF. Cost applies to RIP routes as
well as OSPF routes.
B. Administrative distance indicates the distance to remote networks learned through routing protocols.
Cost applies static routes and directly connected networks.
C. Administrative distance is determined solely through interactions among routers that share a routing
protocol. Cost can be defined by the administrator of each router.
D. Administrative distance is a locally significant value that can be used to break ties between routes
learned from different sources. Cost is a cumulative metric that indicates the number of hops to a remote
network.
Answer: D
HP問題集 HP0-Y12 HP0-Y12参考書
NO.13 What is a difference between voice traffic and video traffic?
A. Voice traffic is typically more difficult to route than streaming video traffic.
B. Voice traffic is typically more sensitive to delay than streaming video traffic.
C. Voice traffic is typically less sensitive to jitter than streaming video traffic.
D. Voice traffic is typically more bandwidth-intensive than streaming video traffic.
Answer: B
HP HP0-Y12練習問題 HP0-Y12 HP0-Y12過去問 HP0-Y12
NO.14 You must design an IP addressing scheme for a network that must support 16 different types of users,
each with
different resource and security requirements. What is an advantage of ensuring that the number of
networks assigned to
each type of user is a power of 2?
A. It enables automatic summarization at classful boundaries.
B. It minimizes the number of VLANs required to support each type of user.
C. It ensures that an adequate number of IP addresses will be available for each type of user.
D. It simplifies summarization because all networks for each type of user can be summarized in a single
routing statement.
Answer: D
HP HP0-Y12 HP0-Y12
NO.15 You must determine if the default settings on ProCurve 5406zl switches will provide adequate QoS for
a multimedia training application. What must you learn about the application in order to make this
determination?
A. if it recognizes IGMP joins from receivers
B. if it uses TCP or UDP as a transport protocol
C. if it inserts Layer 2 or Layer 3 priority markers
D. if it supports Guaranteed Minimum Bandwidth
Answer: C
HP HP0-Y12認定試験 HP0-Y12 HP0-Y12過去問
NO.16 Under what condition does the IEEE 802.1p field provide end-to-end prioritization?
A. All switches can classify traffic based on DSCP.
B. Source and destination hosts are in the same VLAN.
C. The network is experiencing high levels of congestion.
D. All links in the path between source and destination are tagged.
Answer: D
HP認定証 HP0-Y12問題集 HP0-Y12参考書
NO.17 Why does network congestion often cause more network congestion?
A. RSVP routers allocate more bandwidth to UDP applications.
B. TCP applications request retransmission of dropped packets.
C. QoS settings require switches to retransmit all real-time traffic.
D. 802.1p priorities are ignored after congestion reaches a user-defined threshold.
Answer: B
HP認証試験 HP0-Y12 HP0-Y12認証試験 HP0-Y12 HP0-Y12過去問
NO.18 You must configure QoS on a ProCurve Switch 8212zl in the core layer of a network. One interface on
the switch receives traffic that uses only Layer 3 markers to indicate priority. What must you do to enable
the switch to forward this traffic with correct priority?
A. Set the QoS trust level to the appropriate value.
B. Enable the appropriate interpretation of the IP ToS field.
C. Configure port-based priorities for all ports forwarding this traffic.
D. Configure custom IEEE 802.1p maps for all ports forwarding this traffic.
Answer: B
HP認定試験 HP0-Y12 HP0-Y12 HP0-Y12過去問
NO.19 While analyzing network traffic, you notice that many packets have an 802.1p value of 0. On a
ProCurve switch with default QoS settings, what does this indicate?
A. No prioritization settings are in effect on the network.
B. The traffic will be mapped to the normal priority queue.
C. The network relies on Layer 3 classification technologies
D. The network is not using the default settings on ProCurve switches.
Answer: B
HP認定試験 HP0-Y12 HP0-Y12練習問題 HP0-Y12練習問題 HP0-Y12問題集
NO.20 You will connect an IP telephone that supports LLDP-MED to port 8 on a ProCurve Switch 3500yl.
Which configuration step will enable the switch to auto-configure the appropriate VLAN for the phone??
A. Enable LLDP-MED in the VLAN 1 configuration context.
B. Configure port 8 as a tagged member of a voice VLAN.
C. Enable LLDP-MED in the configuration context for a voice VLAN.
D. Define port 8 as an LLDP-MED port in the global configuration context.
Answer: B
HP HP0-Y12練習問題 HP0-Y12参考書 HP0-Y12認定試験
JPexamは最新の問題集と高品質のBCP-240問題と回答を提供します。JPexamのCUR-011 VCEテストエンジンとVCP510PSE試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のHP2-N40 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论