偉大な事業を実現するために信心を持つ必要があります。あなたは自分の知識レベルを疑っていて試験の準備をする前に詰め込み勉強しているときに、自分がどうやって試験に受かることを確保するかを考えましたか。心配しないでください。JPexamはあなたがCiscoの642-681認定試験に合格する確保です。JPexam のトレーニング試験は問題と解答に含まれています。しかも１００パーセントの合格率を保証できます。JPexamのCiscoの642-681試験トレーニング資料を手に入れたら、あなたは自分の第一歩を進めることができます。試験に合格してから、あなたのキャリアは美しい時期を迎えるようになります。
Ciscoの642-681認証試験の合格証は多くのIT者になる夢を持つ方がとりたいです。でも、その試験はITの専門知識と経験が必要なので、合格するために一般的にも大量の時間とエネルギーをかからなければならなくて、助簡単ではありません。JPexamは素早く君のCisco試験に関する知識を補充できて、君の時間とエネルギーが節約させるウェブサイトでございます。JPexamのことに興味があったらネットで提供した部分資料をダウンロードしてください。
試験番号：642-681問題集
試験科目：Advanced Wireless LAN for System Engineers Exam
最近更新時間：2014-02-02
問題と解答：全93問
100％の返金保証。1年間の無料アップデート。
642-681認定試験の準備を効率的にするために、どんなツールが利用に値するものかわかっていますか。私は教えてあげますよ。JPexamの642-681問題集が一番頼もしい資料です。この問題集がIT業界のエリートに研究し出されたもので、素晴らしい練習資料です。この問題集は的中率が高くて、合格率が100％に達するのです。それはIT専門家達は出題のポイントをよく掴むことができて、実際試験に出題される可能性があるすべての問題を問題集に含めることができますから。不思議だと思っていますか。しかし、これは本当のことですよ。
弊社のIT業で経験豊富な専門家たちが正確で、合理的なCisco 642-681認証問題集を作り上げました。 弊社の勉強の商品を選んで、多くの時間とエネルギーを節約こともできます。
JPexamのCiscoの642-681試験問題集を購入したら、あなたは人生の最も重要な試験準備のことを実現できます。あなたは最高のトレーニング資料を手に入れました。JPexamの製品を買ったら、あなた自身のために成功への扉を開きました。あなたは最も小さな努力で最大の成功を取ることができます。
JPexamのCiscoの642-681トレーニング資料を利用したら、初めて試験を受けるあなたでも一回で試験に合格できることを保証します。JPexamのCiscoの642-681トレーニング資料を利用しても合格しないのなら、我々は全額で返金することができます。あなたに他の同じ値段の製品を無料に送って差し上げます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/642-681_exam.html
NO.1 Which three devices are required to implement a Cisco 2700 Series Wireless Location Appliance?
(Choose three.)
A. wireless controller
B. wireless domain server
C. Cisco Wireless Control System
D. controller-based access point
E. standalone access point
F. CiscoWorks Wireless LAN Solution Engine
Answer: ACD
Cisco問題集 642-681 642-681練習問題 642-681 642-681 642-681
NO.2 What is the Cisco-recommended limit of standalone access points to be managed by a CiscoWorks
WLSE 1130-19 with RF management enabled?
A. 1000
B. 1500
C. 1800
D. 2500
Answer: C
Cisco認証試験 642-681練習問題 642-681
NO.3 The Newton manufacturing company has three facilities that are located in Columbia, South Carolina.
The corporate office is located in an 11-story building downtown. The R&D facility is located on the north
side of the city approximately 4 miles (6.4 km) from the corporate office in a five-story building. The
manufacturing facility is located approximately 6 miles (9.6 km) to the northwest of the corporate office.
Line of sight exists from the downtown office to all facilities. Users at the manufacturing plant require
network connectivity for file sharing and e-mail, while the users at the R&D facility require high-speed
Internet access with the ability to send large CAD drawings to the corporate office and large machine
control files to the manufacturing facility. Presently, the manufacturing facility is connected to the
corporate office by a 64-kbps leased line, and the R&D facility is connected to both the corporate office
and the manufacturing facility by a dedicated T1 line. The company plans to add a second line of
development at the R&D facility within the next 60 days. The current T1 lines are at a constant 70-percent
utilization rate. The current projected lead time for installation of additional lines is 90 days if the current
cable plant will support it.
A wireless bridging solution would provide which three benefits to the customer? (Choose three.)
A. rapid deployment
B. immunity to weather
C. increased bandwidth
D. guaranteed bandwidth
E. increased security
F. lower total cost of ownership
Answer: ACF
Cisco認定証 642-681参考書 642-681
NO.4 What is the maximum number of wireless devices that a Cisco 2700 Series Wireless Location
Appliance can track, operating with Cisco WCS version 4.0?
A. 500
B. 1000
C. 1500
D. 2500
Answer: D
Cisco 642-681 642-681参考書 642-681
NO.5 A customer has a small remote site with 10 standalone access points. In which two of the following
scenarios would it be appropriate to implement CiscoWorks WLSE Express? (Choose two.)
A. EAP-Cisco Wireless (Cisco LEAP) security is required and an external AAA server is available.
B. EAP-Cisco Wireless (Cisco LEAP) security is required and no external AAA server is available.
C. EAP-FAST security is required and no external AAA server is available.
D. EAP-FAST security is required and an AAA server is available.
E. MAC authentication is required and no external AAA server is available.
F. MAC authentication is required and an external AAA server is available.
Answer: BC
Cisco問題集 642-681 642-681 642-681 642-681
NO.6 Which statement describes how RSSI information is processed in a WLAN with a location appliance
using controller-based products?
A. Access points aggregate RSSI information.
B. WLAN controllers compute RSSI information.
C. The location appliance collects the RSSI information.
D. The Cisco WCS collects and aggregates the RSSI information and forwards it to the location
appliance.
Answer: C
Cisco 642-681 642-681 642-681
NO.7 Which one of the following integrated services routers supports the integrated 2.4-GHz b/g access
points?
A. Cisco 1812
B. Cisco 1811
C. Cisco 1841
D. Cisco 1803
Answer: C
Cisco 642-681 642-681認定資格 642-681認定試験
NO.8 How many prior configuration versions can be archived on the CiscoWorks WLSE?
A. two
B. four
C. six
D. eight
Answer: B
Cisco 642-681 642-681 642-681認定証
NO.9 Which three wireless intrusion-prevention signatures are part of the standard signature set provided by
the Wireless LAN Controller? (Choose three.)
A. ad-hoc network detection
B. rogue network detection
C. rogue access point detection
D. deauth flood detection
E. fake access point detection
F. NetStumbler detection
Answer: DEF
Cisco 642-681問題集 642-681認証試験 642-681認定試験 642-681
NO.10 In a mesh network, what is the recommended hop-count limit of a mesh access point from its
associated root access point?
A. 2
B. 4
C. 6
D. 8
Answer: B
Cisco練習問題 642-681認定証 642-681認定試験 642-681 642-681
NO.11 The CiscoWorks Wireless LAN Solution Engine uses which protocol for radio management?
A. CCKM
B. LWAPP
C. SNMP
D. WLCCP
Answer: D
Cisco認定証 642-681 642-681過去問 642-681 642-681 642-681認定資格
NO.12 OFDM provides which improvement over DSSS in the 2.4-GHz range?
A. greater resistance to multipath interference
B. more nonoverlapping channels
C. more bandwidth per channel
D. full-duplex communication
Answer: A
Cisco 642-681 642-681参考書 642-681 642-681 642-681
NO.13 What is the maximum number of access points that a high-end Cisco WCS server can support?
A. 500
B. 1000
C. 1500
D. 3000
Answer: D
Cisco 642-681 642-681認定資格 642-681問題集 642-681過去問
NO.14 Which two key features are unique to the controller-based feature set? (Choose two.)
A. fast secure roaming
B. rogue access point detection
C. access point participation in RF management
D. access point registration via digital certificate
E. dynamic RF control without a dedicated management platform
Answer: DE
Cisco認定試験 642-681 642-681認定証 642-681
NO.15 How is a bridge group name used in a wireless mesh deployment?
A. It is used to retrieve the secret shared key.
B. It logically groups access points to avoid interference from neighboring mesh networks.
C. It is used as a password in communication preceding LWAPP.
D. It is used to join the outdoor mesh network with the controller mobility group.
Answer: B
Cisco 642-681認定証 642-681認定試験 642-681 642-681認証試験 642-681認定証
NO.16 Which two statements correctly describe the Cisco Catalyst WiSM? (Choose two.)
A. It supports up to 100 access points per module.
B. It supports up to 200 access points per module.
C. It supports up to 300 access points per module.
D. It has a maximum of four modules per chassis.
E. It has a maximum of five modules per chassis.
F. It has a maximum of six modules per chassis.
Answer: CE
Cisco 642-681 642-681認定資格 642-681認定資格
NO.17 How many mesh access points can be placed on a map with efficient link rendering in Cisco WCS?
A. 50
B. 100
C. 150
D. 200
Answer: B
Cisco 642-681 642-681
NO.18 The Cisco 3200 Series Mobile Access Router has integrated wireless support for which two
FCC-approved frequency ranges? (Choose two.)
A. 900 to 928 MHz
B. 2.400 to 2.4835 GHz
C. 4.940 to 4.990 GHz
D. 5.150 to 5.250 GHz
E. 5.725 to 5.825 GHz
Answer: BC
Cisco過去問 642-681 642-681問題集 642-681 642-681
NO.19 A customer in the United States requires connectivity between two campus locations that are located
6 miles (9.65 km) apart. The customer also needs a minimum data rate of 54 Mbps in an area that is
known to have 2.4-GHz interference. Which two devices will provide a bridge link and avoid the
interference? (Choose two.)
A. Cisco Aironet 1100 Series Access Point
B. Cisco Aironet 1210 Series Access Point
C. Cisco Aironet 1242AG Series Access Point
D. Cisco Aironet 1300 Series Outdoor Access Point/Bridge
E. Cisco Aironet 1400 Series Wireless Bridge
Answer: CE
Cisco 642-681認定資格 642-681 642-681認定証 642-681認定証 642-681
NO.20 The Newton Manufacturing Company has three facilities that are located in Columbia, South Carolina.
The corporate office is located in an 11-story building downtown. The R&D facility is located on the north
side of the city approximately 4 miles (6.4 km) from the corporate office in a five-story building. The
manufacturing facility is located approximately 6 miles (9.6 km) to the northwest of the corporate office.
Line of sight exists from the downtown office to all facilities. Users at the manufacturing plant require
network connectivity for file-sharing and e-mail, while the users at the R&D facility require high-speed
Internet access with the ability to send large CAD drawings to the corporate office and large machine
control files to the manufacturing facility. Presently, the manufacturing facility is connected to the
corporate office by a 64-kbps leased line, and the R&D facility is connected to both the corporate office
and the manufacturing facility by a dedicated T1 line. The company plans to add a second line of
development at the R&D facility within the next 60 days. The current T1 lines are at a constant 70 percent
utilization rate. The current projected lead time for installation of additional lines is 90 days if the cable
plant will support it.
Which deployment option would provide the most benefit to the customer?
A. point-to-point link from corporate to manufacturing, and a point-to-point link from corporate to R&D
B. point-to-multipoint solution with the root bridge located at the manufacturing facility
C. point-to-multipoint solution with the root bridge located at the corporate office
D. point-to-multipoint solution with the root bridge located at the R&D facility
Answer: D
Cisco 642-681認定試験 642-681参考書
JPexamは最新のC2040-441問題集と高品質のCTAL-TM_Syll2012問題と回答を提供します。JPexamの1Y0-250 VCEテストエンジンとVCP510-DT試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-784 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论