JuniperのJN0-522認定試験は業界で広く認証されたIT認定です。世界各地の人々はJuniperのJN0-522認定試験が好きです。この認証は自分のキャリアを強化することができ、自分が成功に近づかせますから。JuniperのJN0-522試験と言ったら、JPexam のJuniperのJN0-522試験トレーニング資料はずっとほかのサイトを先んじているのは、JPexam にはIT領域のエリートが組み立てられた強い団体がありますから。その団体はいつでも最新のJuniper JN0-522試験トレーニング資料を追跡していて、彼らのプロな心を持って、ずっと試験トレーニング資料の研究に力を尽くしています。
Pass4のJuniperのJN0-522試験トレーニング資料を利用したら、最新のJuniperのJN0-522認定試験の問題と解答を得られます。そうしたらPass4のJuniperのJN0-522試験に合格することができるようになります。Pass4のJuniperのJN0-522試験に合格することはあなたのキャリアを助けられて、将来の異なる環境でチャンスを与えます。Pass4のJuniperのJN0-522試験トレーニング資料はあなたが完全に問題と問題に含まれているコンセプトを理解できることを保証しますから、あなたは気楽に一回で試験に合格することができます。
試験番号：JN0-522問題集
試験科目：FXV,Associate (JNCIA-FWV)
最近更新時間：2014-02-19
問題と解答：全160問
100％の返金保証。1年間の無料アップデート。
JuniperのJN0-522認定試験に合格するためにたくさん方法があって、非常に少ないの時間とお金を使いのは最高で、JPexamが対応性の訓練が提供いたします。
JPexamはあなたの１００パーセントの合格率を保証します。例外がないです。いまJPexamを選んで、あなたが始めたいトレーニングを選んで、しかも次のテストに受かったら、最も良いソース及び市場適合性と信頼性を得ることができます。JPexamのJuniperのJN0-522問題集と解答はJN0-522認定試験に一番向いているソフトです。
JPexamがJuniperのJN0-522のサンプルの問題のダウンロードを提供して、あなはリスクフリーの購入のプロセスを体験することができます。これは試用の練習問題で、あなたにインタフェースの友好、問題の質と購入する前の価値を見せます。弊社はJPexamのJuniperのJN0-522のサンプルは製品の性質を確かめるに足りて、あなたに満足させると信じております。あなたの権利と利益を保障するために、JPexamは一回で合格しなかったら、全額で返金することを約束します。弊社の目的はあなたが試験に合格することに助けを差し上げるだけでなく、あなたが本物のIT認証の専門家になることを願っています。あなたが仕事を求める競争力を高めて、自分の技術レベルに合わせている技術職を取って、気楽にホワイトカラー労働者になって高い給料を取ることをお祈りします。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/jn0-522_exam.html
NO.1 Which ScreenOS CLI policy statement keyword would enable a policy only during specified times, days,
and/or dates?
A.at
B.calendar
C.schedule
D.scheduler
Answer:C
Juniper問題集 JN0-522問題集 JN0-522 JN0-522 JN0-522
NO.2 Click the Exhibit button. Traffic from the Internet to the partner servers must use a VIP. In the exhibit,
what is true about the configuration of this feature?
A.You cannot use a VIP in this environment.
B.The VIP can be configured on the e0/4 interface.
C.The VIP can be configured in the Corporate or Internet zone using a different subnet than the physical
interface.
D.The VIP will work only if the destination ports in the incoming packet headers are mapped to the same
ports in the Corporate zone.
Answer:A
Juniper JN0-522認定証 JN0-522練習問題 JN0-522問題集
NO.3 Which ScreenOS CLI command would be useful for troubleshooting a policy deny?
A.get flow debug
B.debug flow basic
C.exec flow analysis
D.debug session basic
Answer:B
Juniper JN0-522参考書 JN0-522練習問題 JN0-522
NO.4 Click the Exhibit button. In the exhibit, if host A initiates a Web browsing session with host D, and the
E0/1 interface of the SSG 20 is in NAT mode, what will be the source address of the packet arriving at
host D?
A.10.1.1.1
B.10.1.10.5
C.143.45.56.1
D.143.45.56.254
Answer:C
Juniper JN0-522 JN0-522 JN0-522参考書 JN0-522 JN0-522
NO.5 Assuming factory default settings, which statement describes the minimum requirements for WebUI
management access to the SSG 5?
A.Connect a PC addressed on the 192.168.1.0 subnet to any interface, open a browser and access
192.168.1.1.
B.Terminate the bootup sequence from the console device, open a browser on the console device and
access 192.168.1.1.
C.Connect a PC addressed on the 192.168.1.0 subnet, to the highest numbered interface and open a
browser and access 192.168.1.1.
D.Using the CLI, define an IP address on a physical interface, connect a PC to the interface and open a
browser to the interface address.
Answer:C
Juniper過去問 JN0-522練習問題 JN0-522認証試験 JN0-522 JN0-522 JN0-522
NO.6 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer:A B
Juniper問題集 JN0-522 JN0-522
NO.7 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer:D
Juniper問題集 JN0-522参考書 JN0-522参考書 JN0-522 JN0-522 JN0-522認定資格
NO.8 Click the Exhibit button. In the exhibit, what is the correct command to configure a default route on the
SSG 20?
A.set route 0.0.0.0/0 vrouter untrust
B.set route 0.0.0.0/0 interface e0/4 gateway 143.45.56.254
C.set route 0.0.0.0/0 interface e0/4 next-hop 143.45.56.254
D.set route 0.0.0.0/0 interface 143.45.56.1 gate 143.45.56.254
Answer:B
Juniper JN0-522 JN0-522 JN0-522 JN0-522
NO.9 Your VPN tunnel does not pass traffic. You run the get ike cookie command and discover that there is no
cookie. Which two should be verified? (Choose two.)
A.routes
B.Phase 1 configuration options
C.Phase 2 configuration options
D.selected quick mode encryption algorithms
Answer:A B
Juniper JN0-522 JN0-522問題集 JN0-522
NO.10 Which ScreenOS CLI command is required to enable a policy during specified times, days, or dates?
A.set time
B.set clock
C.set calendar
D.set scheduler
Answer:D
Juniper参考書 JN0-522認定資格 JN0-522
NO.11 What needs to be configured in Phase 2 of a route-based VPN, that does not need to be configured in a
policy-based VPN?
A.proxy-id
B.tunnel-binding
C.transport mode
D.custom proposals
Answer:B
Juniper JN0-522 JN0-522 JN0-522認定試験 JN0-522
NO.12 Click the Exhibit button. In the exhibit, which two forms of address translation would have generated
the output shown? (Choose two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer:B C
Juniper過去問 JN0-522 JN0-522問題集 JN0-522 JN0-522
NO.13 Which ScreenOS CLI command would be used to view traffic logs?
A.get traffic
B.get log policy
C.get policy log
D.get log traffic
Answer:D
Juniper JN0-522過去問 JN0-522
NO.14 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer:A
Juniper JN0-522 JN0-522 JN0-522 JN0-522
NO.15 You enter the following command: set int e0/8 mip 1.1.8.32 host 10.1.10.32 netmask 255.255.255.255
How many MIP address translations have you just configured?
A.1
B.8
C.128
D.256
Answer:A
Juniper JN0-522参考書 JN0-522認定資格 JN0-522 JN0-522
NO.16 You want to minimize the number of IP addresses, subnets, and policies in use. How should you
configure your tunnel interface?
A.Configure the tunnel interface with an IP address with a 32 bit subnet mask.
B.Configure the tunnel interface with an IP address with a 30 bit subnet mask.
C.Configure the tunnel interface as unnumbered and place the interface in the same zone as the
designated interface.
D.Configure the tunnel interface as unnumbered, but place the tunnel interface in a different zone than the
designated interface.
Answer:C
Juniper認証試験 JN0-522練習問題 JN0-522 JN0-522問題集 JN0-522認定証
NO.17 Which statement is correct about tunnel interfaces?
A.They can have overlapping IP addresses.
B.They need to be configured in the zone where the protected resources reside.
C.They can be unnumbered and used in policy-based translations if the interface is in route mode.
D.They can be unnumbered from any interface residing on the same virtual router as the protected
resources.
Answer:D
Juniper認定証 JN0-522 JN0-522
NO.18 Click the Exhibit button. In the exhibit, what is the correct address book entry for host C?
A.set address C 1.1.70.250/32
B.set address Partner C 1.1.70.250
C.set address Partner 1.1.70.250/32
D.set address Partner C 1.1.70.250/32
Answer:D
Juniper JN0-522認定証 JN0-522認定試験 JN0-522参考書
NO.19 Which command can you use to view the log of IKE negotiations and results?
A.get event type 536
B.get ike cookie
C.get sa active
D.debug ike basic
Answer:A
Juniper JN0-522認証試験 JN0-522 JN0-522認証試験 JN0-522認定試験
NO.20 Click the Exhibit button. In the exhibit, which routing command would allow host A to communicate with
host C? (Note: Assume a route from the SSG 20 to host A's subnet already exists.)
A.set route 0.0.0.0/0 int e0/3 gateway 177.11.56.254
B.set route 1.1.70.0 interface e0/3 gateway 177.11.56.254
C.configure route 1.1.70.0/24 gateway 177.11.56.254 int e0/3
D.set route 1.1.70.0/24 interface e0/3 gateway 177.11.56.254
Answer:D
Juniper JN0-522 JN0-522問題集
JPexamは最新の1z0-593問題集と高品質の1Y0-A28問題と回答を提供します。JPexamのHP2-K36 VCEテストエンジンとIIA-CIA-Part1試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の74-335 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论