この人材が多い社会で、人々はずっと自分の能力を高めていますが、世界で最先端のIT専門家に対する需要が継続的に拡大しています。ですから、Adobeの9A0-057認定試験に受かりたい人が多くなります。しかし、試験に受かるのは容易なことではないです。実は良いトレーニング資料を選んだら試験に合格することは不可能ではないです。JPexamが提供したAdobeの9A0-057試験トレーニング資料はあなたが試験に合格することを助けられます。JPexamのトレーニング資料は大勢な受験生に証明されたもので、国際的に他のサイトをずっと先んじています。Adobeの9A0-057認定試験に合格したいのなら、JPexamが提供したAdobeの9A0-057トレーニング資料をショッピングカートに入れましょう。
JPexamが提供した問題集を使用してIT業界の頂点の第一歩としてとても重要な地位になります。君の夢は1歩更に近くなります。資料を提供するだけでなく、Adobeの9A0-057試験も一年の無料アップデートになっています。
難しいIT認証試験に受かることを選んだら、頑張って準備すべきです。JPexamのAdobeの9A0-057試験トレーニング資料はIT認証試験に受かる最高の資料で、手に入れたら成功への鍵を持つようになります。JPexamのAdobeの9A0-057試験トレーニング資料は信頼できるもので、１００パーセントの合格率を保証します。
試験番号：9A0-057問題集
試験科目：Adobe Illustrator CS3 ACE Exam
最近更新時間：2014-02-02
問題と解答：全130問
100％の返金保証。1年間の無料アップデート。
JPexamの9A0-057問題集には、PDF版およびソフトウェア版のバージョンがあります。それはあなたに最大の利便性を与えることができます。いつでもどこでも問題を学ぶことができるために、あなたはPDF版の問題集をダウンロードしてプリントアウトすることができます。そして、ソフトウェア版の9A0-057問題集は実際試験の雰囲気を感じさせることができます。そうすると、受験するとき、あなたは試験を容易に対処することができます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/9A0-057_exam.html
NO.1 You open a legacy document, loading the same font that was used during the document creation.
When you compare this document with a hard copy of the original document, you discover that the type in
the new document has reflowed. Why does this happen?
A. The type is converted to outline.
B. The file is saved in the EPS format.
C. The OpenType contextual alternates are enabled.
D. The type engines in Illustrator versions are different.
Answer: D
Adobe 9A0-057 9A0-057 9A0-057
NO.2 How does the OpenType font format differ from TrueType and Type 1 fonts?
A. OpenType is a format that can be modified. TrueType and Type 1 fonts CANNOT be modified.
B. OpenType can be used for both desktop printing and Web design. TrueType and Type 1 fonts can only
be used in PostScript printing.
C. OpenType is a cross-platform font format, and TrueType and Type 1 fonts are platform-specific font
formats.
D. OpenType refers to fonts that are outlined. TrueType and Type 1 refer to fonts that are solid.
Answer: C
Adobe 9A0-057 9A0-057
NO.3 You want to create a paragraph of justified text and hang the punctuation so that the right and left
sides of the paragraph maintain a clean, aligned appearance. What should you do?
A. Select the type object and choose Type > Optical Margin Alignment.
B. Use the Smart Punctuation command and enable Smart Quotes.
C. Enable Discretionary Ligatures in the OpenType panel.
D. Enable Optical Tracking in the Character panel.
Answer: A
Adobe参考書 9A0-057問題集 9A0-057 9A0-057練習問題
NO.4 You want to create an object to be used at several locations on a poster. You draw the object in a
document, save the object as a symbol, and apply the symbol multiple times. You want to change the
color of the original object without affecting the existing symbols applied to the poster. What should you
do?
A. Copy and paste the symbol in the document to break the link with the Symbols panel.
B. Select each object in the poster and click the Break Link to Symbol button in the Symbols panel.
C. Select the applied symbols in the poster and choose Expand to break the link.
D. Select the object and choose Redefine Symbol in the Symbols panel menu to break the link.
Answer: B
Adobe認定証 9A0-057 9A0-057認証試験 9A0-057 9A0-057
NO.5 You create a logo and add a patterned background to it. In the Appearance panel, you duplicate the fill
and create a gradient fill on the top of the patterned background. However, you are unable see the pattern
fill below the gradient fill. What should you do?
A. Change the stacking order to place the pattern background in front of the gradient.
B. Select the Reduce to Basic Appearance option in the Appearance panel.
C. Select the gradient fill and apply a blend mode.
D. Change the opacity settings of the pattern.
Answer: C
Adobe参考書 9A0-057認定証 9A0-057 9A0-057 9A0-057
NO.6 You want to apply color to the headline of an advertisement. The gradient fill of the color must
complement the background image that is placed as a link in the document. You create a linear gradient
and apply the gradient to the type, but the type remains black. What should you do?
A. Drag the gradient onto the type with the Gradient tool.
B. Sample the gradient with the Eyedropper tool and apply it to the headline type.
C. Create a character style defining the gradient fill as a Character Color attribute and apply it to the
headline.
D. Use the Create Outlines command to make paths from the headline type and apply the gradient.
Answer: D
Adobe 9A0-057 9A0-057
NO.7 You are creating a conference schedule and want to specify a description for different seminars. The
same typographic attributes, including typeface, leading, and alignment, must be applied to each seminar
description. How should you apply these attributes?
A. Set one paragraph with the desired attributes and use the Bridge application to batch process the
attributes.
B. Create a paragraph style and apply it to the entire text.
C. Set one paragraph with the desired attributes, save as an EPS and place in the file.
D. Create a character style with the desired attributes and apply it to the entire text.
Answer: B
Adobe 9A0-057認定証 9A0-057過去問
NO.8 You want to distort a rectangle by using the Envelope Distort option from the Object menu. What
should you do?
A. Choose Make with Mesh and select the rows and columns to distort the rectangle.
B. Choose Make with Warp and select the Style and Bend to distort the rectangle.
C. Choose Envelope Options and select the Distort Appearance check box in the Envelope Options
dialog box.
D. Choose Make with Top Object to distort the rectangle.
Answer: B
Adobe問題集 9A0-057 9A0-057過去問 9A0-057認定証 9A0-057認証試験
NO.9 You have an Illustrator document that has decorative ornament characters. You want to view all other
ornaments that are available in the fonts that are used in the document. Which panel should you use?
A. Character
B. Control
C. Glyphs
D. Character Styles
Answer: C
Adobe 9A0-057認定資格 9A0-057認定証
NO.10 You create a new paragraph style from a selected, formatted paragraph and apply it as you type in
more text. You then decide to decrease the type size of the style by 1 point. The change is reflected in all
styled paragraphs except the original paragraph in which the paragraph style was defined. Why does this
happen?
A. The original formatted paragraph was legacy text.
B. The original text was imported from Microsoft Word. The Word formatting was still retained by the text,
overriding the Illustrator paragraph style.
C. Character styles were created after the paragraph style was applied to the other paragraphs.
D. The paragraph style was not applied to the selected text after creating the paragraph style from the
selected paragraph.
Answer: D
Adobe認定試験 9A0-057 9A0-057認定証 9A0-057認定試験
NO.11 Click the Exhibit button.
You are creating a sales brochure based on a sample provided by your client. In the sample, the
punctuation appears outside the width of the justified type. What should you do to create the desired
effect without affecting the ability to edit the type?
A. Use the Paragraph panel to apply hanging left and right indents when punctuation appears near the
margins.
B. Set up guides on a grid, setting each line individually and positioning each line to force the punctuation
over the guides.
C. Delete the punctuation that falls near the margins and set the punctuation as separate type elements
outside the margins.
D. Use the Paragraph panel to apply Roman Hanging Punctuation.
Answer: D
Adobe認定試験 9A0-057 9A0-057 9A0-057認証試験 9A0-057練習問題
NO.12 You create a grouped set of objects and apply an opacity setting from 10 percent to 50 percent. You
want the set of objects to blend with the background without having an overlapping effect. What should
you do?
A. Apply Isolate Blending.
B. Apply Knockout Group.
C. Apply the Opacity & Mask Define Knockout shape.
D. Increase the opacity of all objects.
Answer: B
Adobe参考書 9A0-057練習問題 9A0-057 9A0-057認定試験
NO.13 You want to create an object by using a tool that allows you to connect lines and curves. The lines
must be smooth and the anchor points must be placed at all positions where a line or a curve changes
direction. Which tool should you use?
A. Pencil
B. Brush
C. Pen
D. Line
Answer: C
Adobe 9A0-057 9A0-057認定試験 9A0-057問題集 9A0-057認定資格
NO.14 You want to change an object's fill from solid to a gradient. You create the gradient and fill another
object in your document. What should you do to apply the gradient fill to the object?
A. Select the object and use the Eyedropper tool to select the gradient fill.
B. Select the object and use the Paint Brush tool to apply the gradient fill.
C. Select the object and use the Gradient tool to apply the gradient fill.
D. Select the gradient pattern in the Swatches panel.
Answer: A
Adobe認証試験 9A0-057 9A0-057 9A0-057認定試験
NO.15 You convert a photograph to a black and white line art image by using the Live Trace command. You
want to add a few colors to the photo. You choose Object > Live Trace > Tracing Options. What should
you do?
A. Change Mode to Color and adjust the Resample resolution.
B. Select Adjusted Image from the Raster drop-down list and select the Output to Swatches check box.
C. Change Mode to Color and increase the value in Max Colors.
D. Specify a value for Minimum Area and select the Output to Swatches check box.
Answer: C
Adobe 9A0-057問題集 9A0-057 9A0-057 9A0-057
NO.16 You create an object and now you want to increase its size proportionately by 10 percent. You select
the object. What should you do?
A. Use the Scale tool while holding the OPTION key on a Mac computer or the ALT key on a
Windows-based computer.
B. Use the Free Transform tool.
C. Choose Show Bounding Box, and pull one corner of the object in the direction you wish to scale.
D. Double-click the Scale tool, and choose the Uniform option.
Answer: D
Adobe問題集 9A0-057 9A0-057 9A0-057
NO.17 You are creating a drawing of a series of birds in flight. You draw a bird and you want to duplicate it
and change the angle of its direction. Each bird must rotate at an angle of 15 degrees from the last bird.
What should you do?
A. Select the bird and double-click the Rotate tool. Apply a 15-degree angle and click the Copy button to
copy the original bird.
B. Copy and paste the original bird. Use the Rotate tool to rotate the bird by using your mouse.
C. Use the Shear tool to select the bird. Apply a 15-degree angle and click the Copy button to copy the
original bird.
D. Use the Reflect tool to select the bird. Apply a 15-degree angle and click the Copy button to copy the
original bird.
Answer: A
Adobe認定試験 9A0-057 9A0-057過去問
NO.18 You create an object by using the Pen tool and apply a 1 point stroke to the object. You want to
change the stroke to a calligraphic brush stroke without redrawing the object. What should you do?
A. Use the Brush tool to change the stroke to a calligraphic brush stroke.
B. Select the stroke and change it by using the Stroke panel.
C. Select the stroke and update the stroke in the Brushes panel.
D. Open the Brushes panel and click the Options of Selected Object button.
Answer: C
Adobe認定資格 9A0-057過去問 9A0-057認定資格
NO.19 What is the advantage of using an Envelope Distort warp on type artwork over applying a warp effect?
A. Envelope Distort allows you to encode the artwork by embedding the font in the Illustrator document.
B. Envelope Distort allows you to modify the shape of the envelope with the Direct Selection tool.
C. Envelope Distort allows you to create outlines and therefore, you are able to apply gradients and other
effects to the type.
D. Envelope Distort allows you to edit the effect after it is applied.
Answer: B
Adobe 9A0-057 9A0-057練習問題 9A0-057過去問 9A0-057認定資格 9A0-057認証試験
NO.20 You want to edit one line of type that is part of a paragraph in an existing document. Which tool should
you use?
A. Rectangle
B. Eraser
C. Area Type
D. Lasso
Answer: C
Adobe 9A0-057 9A0-057 9A0-057 9A0-057認定試験
JPexamは最新の70-464問題集と高品質のC_TSCM62_65問題と回答を提供します。JPexamのMB2-866 VCEテストエンジンとJN0-694試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のBAS-002 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论