JPexamは正確な選択を与えて、君の悩みを減らして、もし早くてHP HP0-S13認証をとりたければ、早くてJPexamをショッピングカートに入れましょう。あなたにとても良い指導を確保できて、試験に合格するのを助けって、JPexamからすぐにあなたの通行証をとります。
IT認証資料を提供したほかのサイトより、JPexamのプロかつ高品質の製品は最高のものです。JPexamを選んだら成功を選んだということです。JPexamのHPのHP0-S13試験トレーニング資料はあなたが成功への保証です。JPexamを利用したら、あなたはきっと高い点数を取ることができ、あなたの理想なところへと進むことができます。
HP0-S13認定試験に関連する参考資料を提供できるサイトが多くあります。しかし、資料の品質が保証されることができません。それと同時に、あなたに試験に失敗すれば全額返金という保障を与えることもできません。普通の参考資料と比べて、JPexamのHP0-S13問題集は最も利用に値するツールです。JPexamの指導を元にして、あなたは試験の準備を十分にすることができます。しかも、楽に試験に合格することができます。IT領域でより大きな進歩を望むなら、HP0-S13認定試験を受験する必要があります。IT試験に順調に合格することを望むなら、JPexamのHP0-S13問題集を使用する必要があります。
親愛なる受験生の皆様、何かHPのHP0-S13試験のトレーニング授業に加入したいのですか。実は措置を取ったら一回で試験に合格することができます。JPexamのHPのHP0-S13試験のトレーニング資料はとても良い選択なんですよ。JPexamの仮想ネットワークトレーニングと授業は大量の問題集に含まれていますから、ぜひあなたが気楽に試験に合格することを約束します。
JPexamは多種なIT認証試験を受ける方を正確な資料を提供者でございます。弊社の無料なサンプルを遠慮なくダウンロードしてください。
どんな業界で自分に良い昇進機会があると希望する職人がとても多いと思って、IT業界にも例外ではありません。ITの専門者はHPのHP0-S13認定試験があなたの願望を助けって実現できるのがよく分かります。JPexamはあなたの夢に実現させるサイトでございます。
試験番号：HP0-S13問題集
試験科目： HP BladeSystem Class Solutions I
最近更新時間：2014-03-28
問題と解答：全151問
100％の返金保証。1年間の無料アップデート。
今の人材が多い社会中に多くの業界は人材不足でたとえばIT業界はかなり技術的な人材が不足で、HPのHP0-S13認定試験はIT技術の認証試験の1つで、JPexamはHPのHP0-S13認証試験に関するの特別な技術を持ってサイトでございます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/HP0-S13_exam.html
NO.1 From which sources can you configure individual iLO management processors? (Select three.)
A. from an FTP server
B. through a scripted setup
C. from the HP Management CDROM
D. through virtual Keyboard/Video/Monitor (KVM)
E. remotely through a browser-based Web interface
F. locally using the ROM-Based Setup Utility (RBSU)
Answer: BEF
HP過去問 HP0-S13 HP0-S13練習問題 HP0-S13 HP0-S13問題集
NO.2 Which functions does the Onboard Administrator perform in the BladeSystem c-Class? (Select two.)
A. It manages connections to the interconnect modules.
B. It activates Remote Deployment Pack (RDP) when an in-service server fails.
C. It automates the process of deploying server operating systems and software.
D. It drives all management features through the Inter-Integrated Circuit (I2C) and Intelligent Chassis
Management Bus (ICMB) interfaces.
Answer: AD
HP HP0-S13 HP0-S13認定証
NO.3 Ten fans are installed in a fully populated c7000 enclosure and are configured as AC Redundant. All
server blades are powered on. What happens if one fan fails? (Select three.)
A. The fan subsystem health status remains OK.
B. The health LED of the failed fan illuminates red.
C. The health LED of the failed fan illuminates solid amber.
D. The fan subsystem health status changes to FAILED.
E. The fan subsystem health status changes to DEGRADED.
F. The Onboard Administrator increases the fan RPM to maximum.
G. The Onboard Administrator begins to shut down the least active server blades.
Answer: CEF
HP HP0-S13認定証 HP0-S13 HP0-S13
NO.4 Which statements correctly describe the integrated management functionality of HP SIM and HP
BladeSystem c-Class environments? (Select three.)
A. The redundant Onboard Administrator module cannot automatically take over control of the enclosure
until the primary Onboard Administrator module fails.
B. For added security, you must specify your user name and password when accessing the server blade
iLOs from the Onboard Administrator GUI.
C. The Onboard Administrator includes status information from the server blade agents and therefore
displays the same server blade status in its GUI as HP SIM.
D. HP SIM reports the Onboard Administrator modules, server blades, and server blade iLOs separately
because each has its own IP address and its own instrumentation.
E. Both the primary and redundant Onboard Administrator modules share the same IP address, thereby
enabling transparent failover for HP SIM and other management clients.
F. You can change which Onboard Administrator module is active and which is standby by logging in to
the standby Onboard Administrator module user interface and changing its setting.
Answer: ADF
HP認定試験 HP0-S13 HP0-S13認証試験 HP0-S13
NO.5 Which role-based Virtual Connect Manager access enables you to create, edit, and delete Virtual
Connect profiles?
A. Server
B. Admin
C. Storage
D. Domain
E. Networking
Answer: A
HP認定資格 HP0-S13 HP0-S13 HP0-S13練習問題
NO.6 How will the HP BladeSystem c-Class enclosures indicate if a server blade is not installed in the correct
device bay?
A. The HP BladeSystem Insight Display will flash blue.
B. The interconnect will display errors when you configure it.
C. The Onboard Administrator will not allow the enclosure to power on.
D. The Onboard Administrator will not allow the interconnects to power on.
E. The Onboard Administrator will not allow the incorrectly placed server blade to power on.
Answer: E
HP HP0-S13 HP0-S13 HP0-S13認定証
NO.7 What are the features of the HP Customer Self-Repair program? (Select three.)
A. HP ships the replacement part directly to the customer.
B. The customer is responsible for replacing the faulty part.
C. HP ships the replacement part to an authorized partner closest to the customer.
D. The customer diagnoses the issue and determines whether a replacement part is required.
E. The program is available for HP products that are under warranty but not covered by a service
contract.
F. An HP support specialist diagnoses the problem and determines whether a replacement part is
necessary.
Answer: ABF
HP HP0-S13 HP0-S13認定証 HP0-S13過去問
NO.8 Which statements are true regarding the HP StorageWorks Ultrium 448c Tape Blade? (Select three.)
A. The tape blade provides direct-attach data protection for the adjacent server blade.
B. The tape blade provides network backup protection for all data within the enclosure.
C. The tape blade installs in a full-height device bay of either the c3000 or c7000 enclosure.
D. The tape blade installs in a half-height device bay of either the c3000 or c7000 enclosure.
E. The tape blade and the SB40c storage blade can both partner with the same full-height server blade.
F. The tape blade can partner with any of the HP BladeSystem c-Class ProLiant or Integrity server blades.
Answer: ABD
HP参考書 HP0-S13過去問 HP0-S13問題集 HP0-S13
NO.9 You are configuring the MSA1000 storage solution to boot from a SAN. Although there are several
physical drives reported in the ACU graphical user interface, the Selective Storage Presentation (SSP)
link is missing. Why?
A. The ACU has detected multiple paths from the host.
B. The MSA1000 does not have any logical drives defined.
C. An incorrect MSA1000 device driver is loaded in the host server.
D. The host server is not running the HP Insight Agents, or these agents are outdated.
Answer: B
HP HP0-S13 HP0-S13 HP0-S13
NO.10 Which HP software is included with Insight Control Data Center Edition (ICDCE) and can be installed
as an option in the ICDCE installation but must be licensed separately? (Select two.)
A. Server Migration Pack (SMP)
B. Remote Support Pack (RSP)
C. Virtual Machine Management (VMM) Pack
D. Vulnerability and Patch Management (VPM) Pack
Answer: AC
HP認定証 HP0-S13 HP0-S13 HP0-S13練習問題 HP0-S13
NO.11 Which statements describe how the Integrated Lights-Out (iLO) management processor receives its
power in the HP BladeSystem c-Class enclosure? (Select two.)
A. iLO receives its power through a connection to the server.
B. iLO receives its power through an independent connection.
C. iLO can be activated through Virtual Power from a remote server.
D. iLO receives redundant power in the event of a power supply failure.
E. iLO can be activated even if the server is not connected to a power source.
Answer: BD
HP認証試験 HP0-S13認定証 HP0-S13 HP0-S13参考書
NO.12 Which statement correctly describes Insight Control Data Center Edition (ICDCE)?
A. all-in-one Linux-hosted blade management and deployment software package
B. integrated suite of software that simplifies the provisioning, management, and recovery of
BladeSystem infrastructures
C. HP SIM 5.1 plug-in that adds remote monitoring and warranty, HP Care Pack, and contract entitlement
features to HP SIM
D. server deployment solution that facilitates the installation, configuration, and deployment of
high-volumes of servers through either a GUI-based or a Web-based console, using either scripting or
imaging technology
Answer: B
HP HP0-S13 HP0-S13問題集 HP0-S13認証試験
NO.13 Which statements are true when using the HP StorageWorks SB40c storage blade for c-Class?
(Select three.)
A. Each SB40c storage blade can partner with only one server blade.
B. A c7000 enclosure can have a maximum of eight SB40c storage blades.
C. The SB40c storage blade supports Serial Attached SCSI (SAS) drives only.
D. A full-height storage blade can connect to a maximum of two SB40c storage blades.
E. Each SB40c storage blade requires an HP PCI Express Mezzanine Pass-Thru card to be installed in
mezzanine slot 3 of the full-height storage blade.
F. If connecting both the SB40c storage blade and the Ultrium 448c tape blade to the same full-height
server blade, the SB40c storage blade must be installed in the top bay.
Answer: ABE
HP参考書 HP0-S13 HP0-S13
NO.14 Which statements describe the function of the Onboard Administrator? (Select two.)
A. It enables automated provisioning of the HP BladeSystem c-Class server blades.
B. It provides I2C and ICMB management interfaces to all HP BladeSystem c-Class components.
C. It consolidates 16 iLO 2 ports in the c7000 enclosure and 8 iLO 2 ports in the c3000 enclosure.
D. It creates a LAN-based or SAN-based abstraction layer between the server blades and the external
LAN/SAN.
Answer: BC
HP認定資格 HP0-S13 HP0-S13練習問題 HP0-S13
NO.15 Which types of drives are supported by the HP BladeSystem c-Class storage blades? (Select two.)
A. SCSI
B. Serial ATA (SATA)
C. Parallel ATA (PATA)
D. Serial Attached SCSI (SAS)
E. Fibre Attached Technology Adapted (FATA)
Answer: BD
HP HP0-S13 HP0-S13 HP0-S13問題集
NO.16 To utilize all four Ethernet ports on the NC325m PCIe Quad-Port 1Gb Server Adapter, which
mezzanine position must you avoid?
A. mezzanine position 1 in full-height server blades
B. mezzanine position 2 in full-height server blades
C. mezzanine position 3 in full-height server blades
D. mezzanine position 1 in half-height server blades
E. mezzanine position 2 in half-height server blades
Answer: D
HP認定試験 HP0-S13 HP0-S13
NO.17 Which HP BladeSystem c-Class components are covered by the HP 3-year parts, 3-year labor, and
3-year on-site limited global warranty? (Select three.)
A. server blades
B. c7000 enclosures
C. c3000 enclosures
D. SAS and SATA disk drives
E. Ethernet and SAN interconnect switches
F. Ethernet and Fibre Channel Pass-Thru modules
Answer: ABC
HP過去問 HP0-S13練習問題 HP0-S13問題集 HP0-S13 HP0-S13過去問
NO.18 How can the Onboard Administrator show a health status different from the status displayed by HP
Systems Insight Manager (HP SIM)? (Select two.)
A. The passive Onboard Administrator might have been activated through the user interface without
notifying HP SIM.
B. The active Onboard Administrator status does not include information from the agents running on the
server blades.
C. The active Onboard Administrator might indicate a failure that HP SIM displays in the event log rather
than in the health status.
D. The passive Onboard Administrator does not send a trap to HP SIM indicating a change of state when
it activates after a failure.
E. Because of an Integrated Lights-Out (iLO) configuration error, iLO might have indicated different health
states to the Onboard Administrator and to HP SIM.
Answer: BC
HP HP0-S13問題集 HP0-S13
NO.19 Click the Exhibit button.
In a four-fan configuration, where must these fans be installed?
A. bays 1, 2, 3, and 4
B. bays 1, 2, 3, and 5
C. bays 2, 4, 5, and 6
D. bays 3, 4, 5, and 6
Answer: C
HP認定試験 HP0-S13 HP0-S13認定試験 HP0-S13認定試験
NO.20 Which statements are true regarding the BladeSystem? (Select two.)
A. BladeSystem c-Class and p-Class server blades will not ship until 2009.
B. The c-Class interconnects are compatible with the p-Class interconnects at a management interface
level.
C. c-Class server blades can be installed in a p-Class enclosure with an enclosure upgrade kit.
D. p-Class and c-Class server blades are compatible with industry-standard Web Based Enterprise
Management (WBEM).
E. The Onboard Administrator can manage both p-Class and c-Class enclosures.
Answer: BD
HP認定証 HP0-S13 HP0-S13認定証 HP0-S13
JPexamは最新の700-301問題集と高品質の1Y0-200問題と回答を提供します。JPexamのC_TSCM52_66 VCEテストエンジンとHP2-E56試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の1Z1-536 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论