JPexamがもっと早くHPのHP0-S13認証試験に合格させるサイトで、HPのHP0-S13認証試験についての問題集が市場にどんどん湧いてきます。JPexamを選択したら、成功をとりましょう。
最近の数年間で、IT領域の継続的な発展と成長に従って、HP0-S13認証試験はもうHP試験のマイルストーンになりました。HPのHP0-S13の認証試験はあなたがIT分野のプロフェッショナルになることにヘルプを差し上げます。HPのHP0-S13の試験問題を提供するウェブが何百ありますが、なぜ受験生は殆どJPexamを選んだのですか。それはJPexamにはIT領域のエリートたちが組み立てられた団体があります。その団体はHPのHP0-S13の認証試験の最新の資料に専攻して、あなたが気楽にHPのHP0-S13の認証試験に合格するためにがんばっています。JPexamは初めにHPのHP0-S13の認証試験を受けるあなたが一回で成功することを保証します。JPexamはいつまでもあなたのそばにいて、あなたと一緒に苦楽を共にするのです。
インターネットで高品質かつ最新のHPのHP0-S13の試験の資料を提供していると言うサイトがたくさんあります。が、サイトに相関する依頼できる保証が何一つありません。ここで私が言いたいのはJPexamのコアバリューです。すべてのHPのHP0-S13試験は非常に重要ですが、こんな情報技術が急速に発展している時代に、JPexamはただその中の一つです。では、なぜ受験生たちはほとんどJPexamを選んだのですか。それはJPexamが提供した試験問題資料は絶対あなたが試験に合格することを保証しますから。なんでそうやって言ったのはJPexamが提供した試験問題資料は最新な資料ですから。それも受験生たちが実践を通して証明したことです。
試験番号：HP0-S13問題集
試験科目： HP BladeSystem Class Solutions I
最近更新時間：2013-12-26
問題と解答：全151問
100％の返金保証。1年間の無料アップデート。
JPexam のHPのHP0-S13問題集は１００パーセント検証とテストを通過したもので、認定試験に合格する専門的な指導者です。JPexam のHPのHP0-S13練習問題集と解答は実践の検査に合格したソフトウェアで、最も受験生に合うトレーニングツールです。 JPexamで、あなたは一番良い準備資料を見つけられます。その資料は練習問題と解答に含まれています。弊社の資料があなたに練習を実践に移すチャンスを差し上げ、あなたはぜひHPのHP0-S13試験に合格して自分の目標を達成できます。
きみはHPのHP0-S13認定テストに合格するためにたくさんのルートを選択肢があります。JPexamは君のために良い訓練ツールを提供し、君のHP認証試に高品質の参考資料を提供しいたします。あなたの全部な需要を満たすためにいつも頑張ります。
HPのHP0-S13認定試験を受験すれば、JPexamのHP0-S13問題集はあなたが試験の準備をするときに最も選択すべきツールです。この問題集はあなたが楽に試験に合格することを保証します。しかも、これは高く評判されている資料ですから、この問題集を持っていると、もうこれ以上HP0-S13試験を心配する必要がなくなります。この問題集はあなたが試験に準備するときに会う可能性があるすべての難問を解決してあげますから。JPexamのHP0-S13問題集を購入する前に、問題集の無料なサンプルをダウンロードして試用してもいいです。そうすると、問題集があなたに向いているかどうかを自分で判断することができます。
一つの試験だけでは多くの時間を無駄にする必要がありません。HP0-S13認定試験が大変難しいと感じて、多くの時間を取らなければならないとしたら、ツールとしてJPexamのHP0-S13問題集を利用したほうがいいです。この問題集はあなたに時間を節約させることができますから。もっと重要なのは、この問題集はあなたが試験に合格することを保証できますから。この問題集よりもっと良いツールは何一つありません。試験の準備をするのにたくさんの時間を無駄にするより、そんな時間を利用してもっと有意義なことをしたほうがいいです。ですから、はやくJPexamのサイトに行ってもっと多くの情報を読みましょう。この素晴らしきチャンスを逃したらきっと後悔しますよ。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/HP0-S13_exam.html
NO.1 Which statements are true when using the HP StorageWorks SB40c storage blade for c-Class?
(Select three.)
A. Each SB40c storage blade can partner with only one server blade.
B. A c7000 enclosure can have a maximum of eight SB40c storage blades.
C. The SB40c storage blade supports Serial Attached SCSI (SAS) drives only.
D. A full-height storage blade can connect to a maximum of two SB40c storage blades.
E. Each SB40c storage blade requires an HP PCI Express Mezzanine Pass-Thru card to be installed in
mezzanine slot 3 of the full-height storage blade.
F. If connecting both the SB40c storage blade and the Ultrium 448c tape blade to the same full-height
server blade, the SB40c storage blade must be installed in the top bay.
Answer: ABE
HP認定証 HP0-S13過去問 HP0-S13認定証 HP0-S13 HP0-S13
NO.2 Ten fans are installed in a fully populated c7000 enclosure and are configured as AC Redundant. All
server blades are powered on. What happens if one fan fails? (Select three.)
A. The fan subsystem health status remains OK.
B. The health LED of the failed fan illuminates red.
C. The health LED of the failed fan illuminates solid amber.
D. The fan subsystem health status changes to FAILED.
E. The fan subsystem health status changes to DEGRADED.
F. The Onboard Administrator increases the fan RPM to maximum.
G. The Onboard Administrator begins to shut down the least active server blades.
Answer: CEF
HP HP0-S13 HP0-S13 HP0-S13
NO.3 Which role-based Virtual Connect Manager access enables you to create, edit, and delete Virtual
Connect profiles?
A. Server
B. Admin
C. Storage
D. Domain
E. Networking
Answer: A
HP HP0-S13問題集 HP0-S13認定試験 HP0-S13認定試験
NO.4 Which types of drives are supported by the HP BladeSystem c-Class storage blades? (Select two.)
A. SCSI
B. Serial ATA (SATA)
C. Parallel ATA (PATA)
D. Serial Attached SCSI (SAS)
E. Fibre Attached Technology Adapted (FATA)
Answer: BD
HP練習問題 HP0-S13 HP0-S13認定試験
NO.5 Which HP software is included with Insight Control Data Center Edition (ICDCE) and can be installed
as an option in the ICDCE installation but must be licensed separately? (Select two.)
A. Server Migration Pack (SMP)
B. Remote Support Pack (RSP)
C. Virtual Machine Management (VMM) Pack
D. Vulnerability and Patch Management (VPM) Pack
Answer: AC
HP認定資格 HP0-S13認定証 HP0-S13
NO.6 Which HP BladeSystem c-Class components are covered by the HP 3-year parts, 3-year labor, and
3-year on-site limited global warranty? (Select three.)
A. server blades
B. c7000 enclosures
C. c3000 enclosures
D. SAS and SATA disk drives
E. Ethernet and SAN interconnect switches
F. Ethernet and Fibre Channel Pass-Thru modules
Answer: ABC
HP過去問 HP0-S13 HP0-S13参考書
NO.7 Which statements describe how the Integrated Lights-Out (iLO) management processor receives its
power in the HP BladeSystem c-Class enclosure? (Select two.)
A. iLO receives its power through a connection to the server.
B. iLO receives its power through an independent connection.
C. iLO can be activated through Virtual Power from a remote server.
D. iLO receives redundant power in the event of a power supply failure.
E. iLO can be activated even if the server is not connected to a power source.
Answer: BD
HP HP0-S13過去問 HP0-S13認定証 HP0-S13練習問題
NO.8 You are configuring the MSA1000 storage solution to boot from a SAN. Although there are several
physical drives reported in the ACU graphical user interface, the Selective Storage Presentation (SSP)
link is missing. Why?
A. The ACU has detected multiple paths from the host.
B. The MSA1000 does not have any logical drives defined.
C. An incorrect MSA1000 device driver is loaded in the host server.
D. The host server is not running the HP Insight Agents, or these agents are outdated.
Answer: B
HP HP0-S13参考書 HP0-S13 HP0-S13認証試験 HP0-S13過去問
NO.9 How can the Onboard Administrator show a health status different from the status displayed by HP
Systems Insight Manager (HP SIM)? (Select two.)
A. The passive Onboard Administrator might have been activated through the user interface without
notifying HP SIM.
B. The active Onboard Administrator status does not include information from the agents running on the
server blades.
C. The active Onboard Administrator might indicate a failure that HP SIM displays in the event log rather
than in the health status.
D. The passive Onboard Administrator does not send a trap to HP SIM indicating a change of state when
it activates after a failure.
E. Because of an Integrated Lights-Out (iLO) configuration error, iLO might have indicated different health
states to the Onboard Administrator and to HP SIM.
Answer: BC
HP HP0-S13 HP0-S13
NO.10 Which statements correctly describe the integrated management functionality of HP SIM and HP
BladeSystem c-Class environments? (Select three.)
A. The redundant Onboard Administrator module cannot automatically take over control of the enclosure
until the primary Onboard Administrator module fails.
B. For added security, you must specify your user name and password when accessing the server blade
iLOs from the Onboard Administrator GUI.
C. The Onboard Administrator includes status information from the server blade agents and therefore
displays the same server blade status in its GUI as HP SIM.
D. HP SIM reports the Onboard Administrator modules, server blades, and server blade iLOs separately
because each has its own IP address and its own instrumentation.
E. Both the primary and redundant Onboard Administrator modules share the same IP address, thereby
enabling transparent failover for HP SIM and other management clients.
F. You can change which Onboard Administrator module is active and which is standby by logging in to
the standby Onboard Administrator module user interface and changing its setting.
Answer: ADF
HP認定試験 HP0-S13問題集 HP0-S13過去問
NO.11 Which statement correctly describes Insight Control Data Center Edition (ICDCE)?
A. all-in-one Linux-hosted blade management and deployment software package
B. integrated suite of software that simplifies the provisioning, management, and recovery of
BladeSystem infrastructures
C. HP SIM 5.1 plug-in that adds remote monitoring and warranty, HP Care Pack, and contract entitlement
features to HP SIM
D. server deployment solution that facilitates the installation, configuration, and deployment of
high-volumes of servers through either a GUI-based or a Web-based console, using either scripting or
imaging technology
Answer: B
HP認定試験 HP0-S13認定資格 HP0-S13 HP0-S13
NO.12 Which statements are true regarding the HP StorageWorks Ultrium 448c Tape Blade? (Select three.)
A. The tape blade provides direct-attach data protection for the adjacent server blade.
B. The tape blade provides network backup protection for all data within the enclosure.
C. The tape blade installs in a full-height device bay of either the c3000 or c7000 enclosure.
D. The tape blade installs in a half-height device bay of either the c3000 or c7000 enclosure.
E. The tape blade and the SB40c storage blade can both partner with the same full-height server blade.
F. The tape blade can partner with any of the HP BladeSystem c-Class ProLiant or Integrity server blades.
Answer: ABD
HP練習問題 HP0-S13 HP0-S13
NO.13 What are the features of the HP Customer Self-Repair program? (Select three.)
A. HP ships the replacement part directly to the customer.
B. The customer is responsible for replacing the faulty part.
C. HP ships the replacement part to an authorized partner closest to the customer.
D. The customer diagnoses the issue and determines whether a replacement part is required.
E. The program is available for HP products that are under warranty but not covered by a service
contract.
F. An HP support specialist diagnoses the problem and determines whether a replacement part is
necessary.
Answer: ABF
HP認定試験 HP0-S13 HP0-S13
NO.14 Which functions does the Onboard Administrator perform in the BladeSystem c-Class? (Select two.)
A. It manages connections to the interconnect modules.
B. It activates Remote Deployment Pack (RDP) when an in-service server fails.
C. It automates the process of deploying server operating systems and software.
D. It drives all management features through the Inter-Integrated Circuit (I2C) and Intelligent Chassis
Management Bus (ICMB) interfaces.
Answer: AD
HP認定試験 HP0-S13認定証 HP0-S13 HP0-S13 HP0-S13
NO.15 How will the HP BladeSystem c-Class enclosures indicate if a server blade is not installed in the correct
device bay?
A. The HP BladeSystem Insight Display will flash blue.
B. The interconnect will display errors when you configure it.
C. The Onboard Administrator will not allow the enclosure to power on.
D. The Onboard Administrator will not allow the interconnects to power on.
E. The Onboard Administrator will not allow the incorrectly placed server blade to power on.
Answer: E
HP HP0-S13 HP0-S13 HP0-S13認定資格 HP0-S13参考書
NO.16 Click the Exhibit button.
In a four-fan configuration, where must these fans be installed?
A. bays 1, 2, 3, and 4
B. bays 1, 2, 3, and 5
C. bays 2, 4, 5, and 6
D. bays 3, 4, 5, and 6
Answer: C
HP認定証 HP0-S13 HP0-S13認定証 HP0-S13問題集 HP0-S13
NO.17 Which statements describe the function of the Onboard Administrator? (Select two.)
A. It enables automated provisioning of the HP BladeSystem c-Class server blades.
B. It provides I2C and ICMB management interfaces to all HP BladeSystem c-Class components.
C. It consolidates 16 iLO 2 ports in the c7000 enclosure and 8 iLO 2 ports in the c3000 enclosure.
D. It creates a LAN-based or SAN-based abstraction layer between the server blades and the external
LAN/SAN.
Answer: BC
HP HP0-S13問題集 HP0-S13認定資格 HP0-S13練習問題
NO.18 To utilize all four Ethernet ports on the NC325m PCIe Quad-Port 1Gb Server Adapter, which
mezzanine position must you avoid?
A. mezzanine position 1 in full-height server blades
B. mezzanine position 2 in full-height server blades
C. mezzanine position 3 in full-height server blades
D. mezzanine position 1 in half-height server blades
E. mezzanine position 2 in half-height server blades
Answer: D
HP HP0-S13問題集 HP0-S13 HP0-S13 HP0-S13認定試験
NO.19 From which sources can you configure individual iLO management processors? (Select three.)
A. from an FTP server
B. through a scripted setup
C. from the HP Management CDROM
D. through virtual Keyboard/Video/Monitor (KVM)
E. remotely through a browser-based Web interface
F. locally using the ROM-Based Setup Utility (RBSU)
Answer: BEF
HP練習問題 HP0-S13認定証 HP0-S13認定証 HP0-S13練習問題 HP0-S13
NO.20 Which statements are true regarding the BladeSystem? (Select two.)
A. BladeSystem c-Class and p-Class server blades will not ship until 2009.
B. The c-Class interconnects are compatible with the p-Class interconnects at a management interface
level.
C. c-Class server blades can be installed in a p-Class enclosure with an enclosure upgrade kit.
D. p-Class and c-Class server blades are compatible with industry-standard Web Based Enterprise
Management (WBEM).
E. The Onboard Administrator can manage both p-Class and c-Class enclosures.
Answer: BD
HP HP0-S13練習問題 HP0-S13 HP0-S13参考書
JPexamは最新のMB7-701問題集と高品質のMB5-854問題と回答を提供します。JPexamの1Z0-478 VCEテストエンジンとCAT-440試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のCAT-340 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论